Tips to Reduce Heat In Processor

Often after being used for some time, the laptop / net book was hotter than usual. The causes can vary, from software to hardware problems. Behaviors that do not use careless such as giving excessive workload also affects the performance of the processor which in turn generate heat that is not reasonable. In fact, heat is one of the enemies of processor performance. Various applications have been made ​​to optimize the performance of the processor.

However, a variety of performance settings using the software do not got enough, much less for the equipment was old enough. The fan is loose, and dirt on the cooling fins also makes cooling is no longer optimal. At computer stores and electronics are also widely available an additional cooling fan. But also will not work well if the existing cooling system on the equipment is too much trouble.

I myself have several times experienced overheating of the computer that I use for this. Often feels strange because it was not in the load quite a lot but it was hot. The solution is to dismantle and clean. It's the result:

Apparently used for some time, there is a blockage of dust in the cooling fins. I was so much dust that, it looks like cotton dirty coagulating. Of course this is very annoying blockage processor cooling. Clean! ...

The higher the value the better the results of his belongings ...

Glue coins to the liquid refrigerant line processor using instant glue in the corners, in the middle were a little smear of silicone grease to the surface of the coin is really stick to the path that the cooling liquid. Coins may be taped anywhere on the line, considering the adequacy of the available space on the laptop body.

Posted by: Rham rachmat